3
www.rivatech.de
Step2. Install IP device
Caution
!
1)
Place the installation template
that is provided in the package on
the desired position of installation.
2)
Attach the waterproof protection
pad on the bottom plate of the
device.
3)
Drill three holes on the template
and insert anchor blocks into the
holes. Fasten the camera with
screws.
4)
Make sure the cables are properly
connected.
5) Adjust the lens position by referring
to the Step 3.
6)
Put the dome cover on the main
body of the camera. Make sure the
main body and the cover fit each
other into place.
7)
Fasten the cover with screws.
When assembling the main body of the
camera
and its dome cover, make sure
they fit each other into place.
The
camera
may fall off the ceiling even after the proper installation and
mounting. To prevent any accident, make sure the ceiling is firm and stable
enough to support the
camera
. If any reinforcement is needed, consult with your
safety personnel and proceed with the installation.
