Rittal air/water heat exchanger
9
4 Installation
EN
Fig. 4:
Targeted air routing inside the enclosure
4.3.2
Mounting options
The air/water heat exchanger enclosure can be placed
either within or to the right or left of an existing TS 8 en-
closure suite (observe TS 8 dimensions!).
Baying on the left or right
Fig. 5:
Baying on the left or right
If the air/water heat exchanger is bayed on the left or
right, the left side or right side of the air/water heat ex-
changer (as appropriate) must be sealed with a side
panel for TS 8 enclosure systems (Model No. 8106.235
for SK 3378.200 or 8108.235 for SK 3378.280).
Baying in the middle of an enclosure suite
Fig. 6:
Baying in the middle of an enclosure suite
In case of installation within an enclosure suite, it is not
necessary to seal the air/water heat exchanger to the left
or right.
Baying between two TS 8 enclosures
Fig. 7:
Baying between two TS 8 enclosures
If the air/water heat exchanger is placed between two
TS 8 enclosures, but cooling is only required on one
side, the air inlet opening can be closed with an optional
metal cover.
Note:
Use the assembly parts included with the
Rittal system accessories to ensure secure
baying.
200
20˚ C
Note:
The enclosure must be sealed on all sides. In
particular, in the area of the cable inlet open-
ings and the enclosure base.
20˚ C
20˚ C
