Submenu "Revision":
Previous menu item
Exit menu
Next menu item
Switch on
Switch off
Control function "Maintenance":
Previous menu item
Exit menu
Next menu item
Select function
8.4
Settings and displays
Setting the date / time
Before selecting a position:
Has no function
Abort function
Select the position
to be changed
Adopt current value
The current setting is displayed after activation of the function. To be able to make a
change, a current position to be changed must be selected (
[Down]
arrow button).
Changing a selected position:
Increment selected
position
Abort function
Select the position
to be changed
Adopt current value
The selected position can be raised by one using the
[Up]
arrow button. If the dis-
play reaches the highest value for this position, it skips to the lowest value following
the next actuation of the
[Up]
arrow button. If the arrow button is pressed for longer
than three seconds, the value goes up automatically. Due to the type of communica-
tion between the main processor and the control panel, there is a slight delay
between actuation of the button and the reaction of the system. This means that
when a button is released, which was previously held pressed, the value is raised
again by roughly 2.
Display and control elements
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
71
