43
I 1 Operation of CMC-TC master by browser
Tab – Setup
Changing access codes of the selected PU offline (initial startup)
"1234"
,
"0102"
=
user
User ID:
This optional, max. 8-digit number (10000-99999999)
can be used to specify a user ID to be included in a trap
message.
Separator:
(e.g. ‘=’)
Door release:
This 4-digit number contains a decimal digit 0...3
for each of the 4 possible Access Units. The decimal digit
specifies which doors are to be released:
0 -
No door released
1 -
Door 1 released
2 -
Door 2 released
3 -
Doors 1 and 2 released
This number must always comprise 4 digits, irrespective of the
number of Access Units actually connected; a ´0´ is entered for
Access Units which do not exist.
Separator:
(e.g. comma)
Release code:
This 4-digit decimal number contains the release
code which is to be entered via the keypad or which is stored on
the magnetic or smart card. The release code must lie between
0001 and 9999 and must always be entered with four digits.
In contrast to code inputs via the Web page, it is not possible to
specify a range. It is always necessary to enter an unambiguous
4-digit number.
DK 7320.000
Create a text file with the text editor of your PC. The file contents must be structured as shown below. After
making the required entries, save this file with the file name "accesscodes.txt".
