L
WARNING
Danger due to high pressure!
The propellant cartridge of the release unit is pressurized in an unreleased state at
620 bar. Severe physical injury can result from damage to a pressure hull in an
unreleased state.
● Allow only trained personnel to handle and install a new full tank.
1 Connection loss monitoring
2 Tank
3 Propellant cartridge
4 Ignition plug
5 Earthing screw
6 Threaded union nozzle pipe
10.3.2
Removal
Required tools:
● Slotted screwdriver (size 3.0) for wire reed contact under terminal
● Torx screwdriver (size 10) for cover screws
● Socket wrench 5.5 mm
● 8 mm (flat) spanner for the earthing screws
● Stable storage area
INFORMATION
Only use suitable tools when changing the tank.
Fig. 45: Overview tank
Fig. 46: Blocking switch (on the rear of
the system)
Repairs
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US
71
