1 CE labelling
EN
4
We reserve the right to make technical modifications.
Rittal stationary busbar cutting unit CW 120-S
1
CE labelling
Rittal GmbH & Co. KG confirms the conformity of the stationary busbar cutting
unit with machine directive 2006/42/EC and with EMC directive 2014/30/EU. An
appropriate declaration of conformity has been issued. It can be found at the end
of this document, on the Rittal Homepage or accompanies the unit as separate
document.
2
Safety instructions
2.1
Symbols in these operating instructions
The following symbols are used in this documentation:
This symbol indicates an "action point" and shows that you should perform an
operation or work step.
2.2
Symbols on the unit
The following symbols are attached to the unit.
2.3
General safety instructions
When working with high-pressure hydraulic units, improper handling and/or poor
maintenance can damage the unit and cause severe injuries. Consequently, ob-
serve all the following safety instructions and contact our service team should
you have any questions.
Warning!
A hazardous situation which may lead to death or serious in-
jury if the instructions are not followed.
Caution!
Hazardous situation which may lead to (minor) injuries if the
instructions are not followed.
Note:
Important notices and indication of situations which may result in
material damage.
Warning of laser radiation.
Risk of being crushed or cut by moving unit components.
Observe the operating instructions.
Wear safety goggles.
