Rittal 4051.100, Assembly And Operating Instructions Manual

Page: 6 / 44

2 Notes on documentation
EN
6 Technical changes reserved Rittal Wire Station WS 540
2 Notes on documentation
2.1 CE label
Rittal GmbH & Co. KG confirms that the Wire Station WS 540 is compliant with
the Machinery Directive 2006/42/EC and the EMC Directive 2014/30/EU. An
appropriate declaration of conformity has been prepared. It can be found at the
end of this document, on the Rittal Homepage or accompanies the unit as a
separate document.
2.2 Storing the documents
These assembly operating instructions, together with all applicable documents,
are integral components of the product. They must be issued to everyone who
works with the machine and must always be available and on hand for the
operating and maintenance personnel.
2.3 Symbols used in these assembly and operating instructions
The following symbols are used in this documentation:

This symbol indicates an "action point" and shows that you should perform an
operation or work step.
2.4 Intended use
The Wire Station WS 540 serves as mobile workstation for the control cabinet
engineer. Your worktop is height-adjustable in the range 810 to 1350 mm.
The Wire Station WS 540 is not suitable for use by individuals with limited
physical, sensory or intellectual abilities or with a lack of knowledge and/or
experience, unless they are supervised by a person who is responsible for their
safety or have been instructed by them on how to use the unit.
Compliance with all instructions and observance of the prescribed operating
conditions constitute part of the intended use.
Danger!
Hazardous situation which will result in death or serious
injury if the instructions are not followed.
Warning!
Hazardous situation which may lead to death or serious
injury if the instructions are not followed.
Caution!
Hazardous situation which may lead to (minor) injuries if the
instructions are not followed.
Note:
Indicates situations that can lead to material damage.