2009.3.25
V1.12
24
Item Description
LOCK/ZOOM
Press LOCK/ZOOM to select entire screen as detection area.
MUTE / PIP
Press MUTE/PIP to deselect entire screen as detection area.
STATUS
Switch between “select” and “deselect” for cursor-dragging function
ENTER
Press to function on the selected area with assigned status
MENU
Press to save the setup and leave
ESC
Press to cancel the setup and leave
4-2.2 SENSOR SETUP
Item Description
Sensor Detection
Check the box to Enable/Disable sensor detection for all channels.
Sensor Popup
Check the box to Enable/Disable popup screen function for all
channels. When Sensor is detected in LIVE mode, the detected
channel image will pop up in full screen display.
Sensor Polarity
Click or press
▼
to select between HIGH, LOW
voltage for
triggering sensor detection or OFF to turn off polarity for each
channel
Low
Polarity
：
Sensor has not been triggered. When connected,
sensor will be turned on..
High
Polarity
：
Sensor has been triggered. When connected, sensor
status will be turned off..
Off
：
Sensor is deactivated, and will not be turned on/off.
Note
：
4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
