2009.3.25
V1.12
23
4-2.1 MOTION SETUP
Item Description
Motion Detection
Check the box to Enable/Disable Motion Detection for all
channels.
Motion Popup
Check the box to Enable/Disable popup screen function for all
channels. When motion is detected in LIVE mode, the
detected channel image will pop up in full screen display.
1~16
You can setup independently for each channel.
Selected Channel Turn
Check the box to Enable/Disable motion detection for each
channel.
Object Size
Drag the white bar or press
◀
▶
to set up Object Size from
value 1 to 15 for each channel. The lower value you set the
higher sensitivity it will be. Value set up as 1, the motion will be
detected easiest.
Sensitivity
Drag the white bar or press
◀
▶
to set up Sensitivity from
value 1 to 15 for each channel. The lower value you set the
higher sensitivity it will be
Motion Area Setup
Enter to setup motion detection area
Note
：
4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
4-2.1.1 MOTION AREA SETUP
The motion detection has been divided into 16x12 grids. The default detection area is full
screen as it marked in transparent for local DVR and purple for remote access. Areas
deselected for motion detection are marked in red for both local and remote site.
