background image

1.Align the threaded end of the antenna  

  with the radio’s antenna connector.
2.Turn the antenna clockwise to attach  

  to the radio.

5.

6.

Ritron offers a wide range of audio accessories and headsets to help customize your  

NT Series radio for your application. All NT Series audio accessories include a durable, 

2-Pin Plug. The 2-Pin Plug keeps the audio accessory firmly attached to the NT Series 

radio during use.

1. To attach audio accessory to the NT Series radio- first pull the rubber dust cover down  

  away from the radio. The dust cover remains attached to radio.

2. Attach audio accessory to the NT Series radio. (see diagram for proper position of the  

  2-Pin Plug). Cord leading to the headset or speaker mic of the accessory must be  

  directed toward the top of the radio.

NT Series Audio Accessories

RSM-10X—Remote Speaker Microphone  

with rotating spring action clip. Speaker/mic  

can be attached to clothing close to mouth  

and ears allowing easier communication  

without removing radio from belt.
RHD-16X—Earbud w/ pendant PTT with built-in 

microphone and clip. Enables private listening 

and great for noisy environments. Mic with PTT 

can be attached to clothing for easy activation.
NH-PT—Nylon Carry Holster with Fixed  

Metal Belt Clip
Charger Kit—6-unit 110/220 VAC,  

12 VDC Charger. (Does not include 6 

individual charging trays. Trays included

as standard with each NT radio).

Fast Rate Drop-in Charger (BC-PT)

The enclosed single slot charger can charge a radio, or a battery removed from the radio.  

Note: Charge battery completely before use!

A completely discharged pack will be  

recharged in approximately 2.5 hours

Place spare battery pack in slot  

with label facing forward.

Place radio with attached battery  

pack or battery pack only.  

1.To turn the radio ON, turn the knob  

  clockwise. To turn the radio OFF, turn  

  the knob fully counter clockwise.
2.To adjust volume UP, turn the knob  

  clockwise.To turn the volume DOWN,  

  turn the knob counter clockwise.

NOTE: 1. Do not use radio or activate transmitter unless antenna is    

 

  securely fastened to radio.

 

2. Do not use any portable radio that has a damaged antenna.

• Use only a Ritron approved  

  110 VAC adapter.

• Do not attempt to repair.

• Do not attempt to charge  

  any other brand of battery!

• Do not expose to rain,  

  snow, or moisture

• Do not use an extension  

  cord to run power to  

  the charger.

LED  

STATUS  

Red..........Charging
Green...... Complete
Amber......Waiting

Attaching The Antenna

                  On/OFF/Volume Control

6 Unit Gang Charger Kit

H-PT

CONNECTOR

RHD-16X

RSM-10X

Summary of Contents for NT Series










Reviews: