Tone Deviation
1. Key the transmitter and adjust R347 (TONE DEVIATION) for the desired tone/code deviation, typically 400 Hz.
2. Unkey the transmitter.
RECEIVER
1. Apply power to the Repeater. The green front panel LED should be illuminated, but may be blinking.
2. Connect the MON input (modular jack pin 4) to ground (modular jack pin 1). This will override the tone squelch
operation and also inhibit the transmitter.
Receive VCO Tuning
1. Connect a high impedance oscilloscope probe to an oscilloscope set for 1 V/div, DC coupled. The sweep speed is
not important.
Summary of Contents for Liberty RLR-460
Page 14: ......
