Ritron DISPLAY Series, Owner'S Manual

Page: 19 / 26

RADIO PROGRAMMING
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com page 15
TABLE 2: INTERFERENCE ELIMINATOR
PROGRAMMABLE QC TONE
Code Hz Code Hz Code Hz
01 67.0 18 123.0 35 225.7
02 71.9 19 127.3 36 233.6
03 74.4 20 131.8 37 241.8
04 77.0 21 136.5 38 250.3
05 79.7 22 141.3 39 69.4
06 82.5 23 146.2 40 159.8
07 85.4 24 151.4 41 165.5
08 88.5 25 156.7 42 171.3
09 91.5 26 162.2 43 177.3
10 94.8 27 167.9 44 No Tone
11 97.4 28 173.8 45 183.5
12 100.0 29 179.9 46 189.9
13 103.5 30 186.2 47 196.6
14 107.2 31 192.8 48 199.5
15 110.9 32 203.5 49 206.5
16 114.8 33 210.7 50 229.1
17 118.8 34 218.1 51 254.1
00 Delete
TABLE 3: DIGITAL INTERFERENCE ELIMINATOR
PROGRAMMABLE DQC TONE
CODE NUMBERS
023 072 152 244 311 412 466 632
025 073 155 245 315 413 503 645
026 074 156 246 325 423 506 654
031 114 162 251 331 431 516 662
032 115 165 252 332 432 523 664
036 116 172 255 343 445 532 703
043 122 174 261 346 446 546 712
047 125 205 263 351 452 565 723
051 131 212 265 356 454 606 731
053 132 223 266 364 455 612 732
054 134 225 271 365 462 624 734
065 143 226 274 371 464 627 743
071 145 243 306 411 465 631 754
HOW TO FIELD PROGRAM RADIO FEATURE CODES
1. Follow the instructions in FIG-7 on page 12 to place the base station in the Program /
Readout Mode.
2. Using the PTT (push-to-talk) button and the LED display, enter the single digit code
from Table 4 below for the option to be programmed.
3. Pause
—the display will change and show a hyphen, you will also hear a short low
tone.
4. Press and release the On / Volume Up to SAVE your programming entry. The base
station will sound a triple beep to indicate that programming was successful.
5. Turn the base station OFF and then ON again
—the base station is now ready to use.
TABLE 4: Radio Feature Codes
Option Code
Turn Channel Scan
ON 1
Turn Channel Scan OFF 2
Turn Weather Channel ON 3
Turn Weather Channel OFF 4
Turn Weather Alert ON 5
Turn Weather Alert OFF 6
Assign SCAN option to Z Button 7
Assign WEATHER option to Z Button 8
Assign MONITOR option to Z Button 9
Assign CALL TONE option to Z Button 0
NOTES:
1. If Code 7 is selected Codes 1 & 2 will have no effect
2. If Code 8 is selected, Codes 3 & 4 will have no effect
3. Code 0 is entered by pressing the PTT 10 times