Operating Manual Version 6.3-04 of 10.10.18
18
A long beep indicates the upper energy level limit.
The energy level decrease is accompanied by clicks at the adjustment
rate, the decrease of the ‘
’ LED brightness and the
‘D’, ‘Am’
and
‘Fm’
LEDs going out one after another, as shown above. A long beep indicates
the lower energy level limit.
4.2.6
To set the Dosing mode, press the
‘ ’
button (sequence of sin-
gle taps) until the
‘D’
LED lights up. While the
‘D’
LED is glowing, press
the
‘ ’
button to switch the mode on
,
and the
‘ ’
button
–
to switch it
off. The mode switching on is accompanied by an ascending two-tone
beep, the switching off – with a descending two-tone beep. In Dosing
mode when the electrode is placed on the skin, a short high-pitch beep
sounds and the
‘D’
LED lights up. In 1-3 sec a short low-pitch beep sounds
and the
‘D’
LED switches out.
(Optional) To select the Dosing mode, press the
‘ ’
button (sequence
of single taps) until the
‘D’
LED starts blinking. While the
‘D’
LED is
blinking, the
‘D1’
mode can be selected by pressing the
‘ ’
button (se-
quence of single taps). The activation of the
‘D1’
mode is indicated by a
short single beep and long flashes of the
‘D’
LED during 2 seconds.
(Optional) Also while the
‘D’
LED is blinking, the
‘D2’
mode can be
selected by pressing the
‘ ’
button (sequence of single taps). The activa-
tion of the
‘D2’
mode is indicated by two short beeps and short intermit-
tent flashes of the
‘D’
LED during 2 seconds.
(Optional) To switch the Dosing mode off, press the
‘ ’
button while
the
‘D’
LED is blinking; the mode switching off is indicated by a long
beeping sound and short flashes of the
‘D’
LED during 2 seconds.
(Optional) In the
‘D1’
mode when the electrode is placed on the skin, a
short high-pitch beep sounds. In 1-3 sec – a short low-pitch beep. All four
LEDs indicate a level of initial reaction during 1 second after the second beep:
Reaction level
Indication
Reaction
< 18
All LEDs are switched off
18 <=
Reaction
< 25
LED
‘D’
lights up
25 <=
Reaction
< 40
LEDs
‘D’
and
‘Am’
light up
40 <=
Reaction
< 60
LEDs
‘D’, ‘Am’
and
‘Fm’
light up
60 <=
Reaction
LEDs ‘
D
’, ‘
Am’
, ‘
Fm
’ and
‘F’
light up
While delivering the dose, the
‘D’
,
‘Am’
,
‘Fm’
and
‘F’
LEDs light up
sequentially (by one or several together), single beeps may sound – depend-
ing on the dose delivery rate. The greater the number of glowing LEDs, the
less time is left to reach the dose; when the dose is reached, all the four
LEDs flash on shortly and an intermittent beep sounds. The LEDs light-up
rate and the number of intermediate beeps can vary on different skin areas.
