Genisys™ HL-900 Dock Leveler
Owner's Manual
Rite-Hite
®
16
Publication:
AMEN00160 2021‑08‑17
OPERATION
STATE
POSITION
Standard
1 Activate the leveler by pushing and holding the
RAISE button until leveler is fully raised and lip is fully
extended
NOTE:
Some levelers may be equipped with a 2
button control box If so, push and hold the RAISE
button to raise the platform While pressing the RAISE
button, push the LIP EXTEND button to fully extend
the lip when the lip has cleared trailer bed
2 When lip is fully extended, release RAISE button
The leveler will automatically lower onto the truck/
trailer bed
NOTE:
Some levelers may be equipped with a
2 button control box If so, release RAISE and LIP
EXTEND buttons
Be sure the lip is in full contact with the truck/trailer
bed before loading or unloading truck/trailer
3 See
• Levelers without Automatic Return to Dock (ARTD)
If the truck/trailer departs, the leveler will move to
its lowest position and the lip will fall to the pendant
position inside the dock bumpers
• Levelers with Automatic Return to Dock (ARTD) If
the lip is on the truck/trailer and the truck departs,
the leveler will move to its lowest position and the
lip will begin to lower As the lip drops toward the
pendant position, the ARTD system automatically
returns the leveler to the stored position without
operator assistance
Below Dock Loading
1 Activate the leveler by pushing and holding the
RAISE button until leveler is fully raised and lip is fully
extended
NOTE:
Some levelers may be equipped with a
2 button control box If so, push and hold the RAISE
button to raise the platform While pressing the RAISE
button, push the LIP EXTEND button to fully extend
the lip when the lip has cleared trailer bed
2 When lip is fully extended, release RAISE button
NOTE:
Some levelers may be equipped with a
2 button control box If so, release RAISE and LIP
EXTEND buttons
3 When loading/unloading is complete, continue with
normal operation or return the leveler to stored
position See
