Riso SE 9380, User Manual

Page: 43 / 268

Basic Operations
Placing the original
41
Placing the original
When placing on the Glass Platen
Open the Platen Cover and place the original face-
down. Align the center of the original with the mark on
the left-hand side of the glass. After placing the original,
slowly close the Platen Cover.
Magazines, books, scrap books, etc. should be placed
on the Glass Platen. Note:
• If the Gauge Cover is installed, place the original
underneath.
When placing in the ADF unit (Option)
Use the ADF unit if you are printing multiple originals in succession.
Place originals so that the one to be scanned first is on the top. Afterwards, align the ADF Original Guides with the
page width and set originals fully to the rear of the ADF.
Important!:
• If the original is smaller than the paper size that can be set in the ADF unit, place the original on the Glass Platen.
• Do not place multiple originals of differing sizes or otherwise unsuitable originals into the ADF unit.
It might cause paper jams and damage the machine.
) p.18
• Once the originals are placed into the ADF unit, “Auto Process” setting is turned ON. Press the key to turn
it OFF. Default “Auto Process” setting for the ADF unit can be changed on the Admin. Screen.
) p.167, ) p.168
Note:
• Up to 50 sheets of 80 g/m
2
(21-lb bond) paper can be placed in the ADF unit.
• To print a proof copy after each master-making process, select [ADF Semi-Auto] .
) p.155
Gauge Cover
Grasp here
and lift up the
gauge cover
Place the original
face-down