Riso rz 510, User Manual, Page: 41 / 178

Basic Operations
Printing from a Computer Data [Direct Print]
39
Printing Computer Data
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
) p.28
• If the key is lit, the machine is in Energy
Saving mode. Press the key to cancel
Energy Saving mode.
• The machine automatically wakes up from
Energy Saving mode when data is sent from a
computer, and it starts processing the data.
• If you are using RISORINC-NET (Option), you
can check the machine status (power ON/OFF,
paper settings, etc.) remotely from your com-
puter monitor.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following
page:
) p.28
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
) p.31
3
Set printing options from your com-
puter screen.
Important!:
• Make sure to uncheck the “Collate” option in the
Print dialog box.
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry ink.
Before printing, either perform an Idling Action
(
) p.91) (especially when using Full Auto
mode) or press the key to print proof
copies several times.
4
Click [OK] on the print dialog box.
Data is sent from the computer.
When the machine receives data, a print job auto-
matically starts in accordance with the printer
driver settings.
Skip to step 6 if you are printing in Full Auto.
Note:
• If the data contains multiple pages, all pages
are printed at once.
• To manually stop a job during master-making or
printing operation, press the key. In mas-
ter-making process, the machine will stop after
the master is made. In the printing process, the
machine will stop printing.
Press the
key to resume the job.
• You can also adjust Print Position, the density,
and the speed while Print process is in
progress.
• Entering the number of copies from the Print
Quantity Keys will override the number speci-
fied in the print driver dialog.
ORCH_ML_EN.book Page 39 Wednesday, November 10, 2004 7:32 PM