Riso rz 510, User Manual, Page: 21 / 178

Getting Acquainted
Control Panel
19
13)
Start Key
Starts master-making or printing process or executes
specified operations.
The key is lighted only when the key is active.
14)
Proof Key ( ) p.66)
Use when you want to check print result after adjusting
the print position, for example.
This allows you to print proof copies without affecting the
value on the Print Quantity Display.
15)
Stop Key
Stops current operation in progress. During the master-
making procedure, the machine will not stop until the
master-making process is completed.
16)
Reset Key
Returns all settings to the initial settings.
17)
Wake-Up Key
Wakes up the printer in Energy Saving mode.
18)
Auto-Process Key ( ) p.50)
Performs non-stop operation from master-making
through printing. When activated, the indicator besides
the key lights.
19)
Print Key
Makes the printer be ready for printing.
20)
Master-Making Key
Makes the printer be ready for making masters.
21)
Progress Arrows
Indicates master-making and printing progress status.
Ready to make a master (Auto ON): when 1 is blinking
Ready to make a master: when 1, 2 are blinking
Ready to print: when 3, 4 are blinking
The indicator increases one bar at a time from the left,
indicating the progress of the current master-making or
printing job.
• If a master-making or printing job is halted, the
progress bar stays lit at that position. (Ready for
resume)
MASTER-MAKING PRINT
WAKE-UP
AUTO-PROCESS
PROOF
RESET
STOP
START
FAST
DARK
Ready to Make Master
20 21 19 18 17
13 14 15 16
1)
Master-Making
Indicator
2)
Master-Making
Stop Bar
3)
Print Indicator
4)
Printing Stop Bar
ORCH_ML_EN.book Page 19 Wednesday, November 10, 2004 7:32 PM