Riso MH 9350 User Manual Download

Page: 52 / 218

Chapter 2 Basic Operations

Releasing the authentication status

The status in which this machine has identified the
user after the authentication operation succeeds is
referred to as "authentication status".

After using this machine, release the authentication

status.

Press the [WAKE-UP] key that is
lit.

In the authentication status, the [WAKE-UP]
key (

23) is lit even when the machine is not

in sleep mode. If you press the [WAKE-UP] key
in this status, authentication is released.

If the authentication status is not
released, this machine will become
available to other users.

The authentication status is auto-
matically released after the speci-
fied time in [Auto Clear] (

141) or

[Auto Sleep] (

143) has elapsed.

Summary of Contents for MH 9350



























































































































































































































Search results

Summary of Contents for MH 9350

Reviews:

Related manuals for MH 9350

Brands by name

Popular brands

Riso MH 9350, User Manual

Search results

Summary of Contents for MH 9350

Reviews:

Related manuals for MH 9350

Brands by name

Popular brands