Riso MH 9350, User Manual

Page: 42 / 218

Chapter 2 Basic Operations
40
Printing from Computer
1
Turn on the power to this machine.
Press the [
X
] side of the power switch.
2
Check the paper.
(
A
30 “Setting up the paper feed tray and the
paper”)
3
Check the paper receiving tray.
(
A
31 “Setting up the paper receiving tray”)
4
Set the printing conditions in the
[Print] dialog box on the computer.
Select the name of your printer under [Select
Printer], and then enter the number of copies in
the [Number of copies] field.
■
Example of the [Print] dialog box
5
Perform the required settings in
the [Printer Setup]
1
screen.
Click [Preferences]
1
in the [Print] dialog box,
and then perform the following settings.
1
The screen name and button name may vary
depending on the application software that you
use.
■
[Advanced] tab screen
[Auto Process]: Before master making and
the printing process, you can temporarily stop
the operation to check the proof copy, perform
various settings, replace the paper, or do other
necessary work.
[ID print]: This setting is useful for printing
highly confidential originals.
■
[Coloring] tab screen
You can configure the mono-color and dual-
color printing settings.
■ Other printing settings
For more information, see the “RISO Printer
Driver User’s Guide” (DVD-ROM).
6
Click [OK].
The [Print] dialog box is displayed.
7
Click [Print].
2
The original data is printed according to the
printer driver settings.
2
The button name may vary depending on the
application software that you use.
• When [Auto Process] is [ON]:
Master making is followed by the printing pro-
cess.
• When [Auto Process] is set to other than
[ON]:
Perform the necessary operation according to
the settings.
(
A
41 “When [Auto Process] is set to other
than [ON]”)
You can print the original data that was created
using a computer on this machine.
B
Before printing, it is necessary to
install the printer driver dedicated for
this machine in the computer.
B
When an authentication screen
(
A
24) is displayed, follow the
instructions on the screen.
B
Clear the [Collate] check box. If
this check box is selected, mas-
ter making is repeated each time
a single copy is printed.