Riso MH 9350, User Manual

Page: 39 / 218

Chapter 2 Basic Operations
37
2
Mono-color printing
The master making and print processes for a scanned
original are performed with either of the print drums
(cylinders).
1
Check that the power switch of
this machine is on.
Press the [
X
] side of the power switch.
2
In the [HOME] screen, touch the
button ([
k
] / [
l
]) of the print drum
(cylinder) that you will use.
B
To print more copies, enter the num-
ber of copies and press the [START]
key.
B
To start master making for the next
original, repeat the procedure from
step 4.
B
When you place originals on the
optional auto document feeder and
the [ADF Semi-Auto] setting (
A
84)
is turned on, master making for the
next original starts automatically.
Repeat the procedure from step 14
for each original.
B
To cancel the authentication status,
press the [WAKE-UP] key.
The authentication status is also
cancelled when the time that is set
in [Auto Sleep] (
A
143) or [Auto
Clear] (
A
141) elapses.
B
When using print drum (cylinder) 2 for
mono-color printing, you need to load a
blank master on print drum (cylinder) 1
or remove print drum (cylinder) 1.
B
When an authentication screen
(
A
24) is displayed, follow the
instructions on the screen.
When print drum (cylinder) 1 is used
Master making and printing
are not performed
Final
When print drum (cylinder) 2 is used
Master making and print-
ing are not performed
Final