Riso ME 6350, User Manual, Page: 24 / 306

Getting Acquainted
Control Panel
24
Control Panel
The Control Panel features permanent keys such as and . It also has a large-size display that shows var-
ious messages and function buttons.
This section describes hardware key names and functions, as well as the display window and its functions.
1)
MODE Key
Use to change modes.
2)
Display ( ) p.26
∼
p.33)
3)
Print Quantity Display
Displays the number of copies, or numeric values
entered for various settings.
4)
P Key ( ) p.151)
Use to retrieve stored programs. The indicator on the key
lights up when set.
5)
× Key ( ) p.151)
Use to move between the fields on Setup Screens, or set
up programed printing.
6)
+ Key ( ) p.151)
Use to move between the fields on Setup Screens, or set
up programed printing.
7)
C Key
Cancels the entered numerical values, or resets the
counter to 0.
8)
Print Quantity Keys (0 to 9 Keys)
Use to enter the number of copies, or the numerical val-
ues for various settings.
9)
Key ( ) p.151, ) p.163)
Use to move between the items on a Setup Screen, or
retrieve the stored memory.
10)
Print Speed Adjustment Keys / Indicator
(
) p.114)
Select the print speed from five levels.
The indicator above the keys shows the current speed
level.
11)
Print Density Adjustment Keys / Indicator
(For Print Drum (Cylinder) 1, For Print Drum
(Cylinder) 2) (
) p.116)
Select the print density from five levels.
The indicator above the keys shows the current density
level.
12)
Print Position Adjustment Keys / Indicator
(For Print Drum (Cylinder) 1, For Print Drum
(Cylinder) 2) (
) p.117)
Adjust the print position in the vertical direction (within
±15 mm (±
19
/
32
"
)) and/or in the horizontal direction
(within ±10 mm (±
25
/
64
"
)) after making a master.
The indicator above the keys shows the offset amount
from the center.
To clear the offset amount, press
.
1 2 3 4
5 6 7 8 9