Riso ME 6350, User Manual

Page: 116 / 306

Functions for Printing
Adjusting the Print Density [Print Density Adjustment]
116
Adjusting the Print Density
[Print Density Adjustment]
You can select the print density from five levels by each Print Drum (Cylinder).
You can adjust the print density while printing is in progress.
Important!:
• “Print Density” is not available when [Ink Saving] is selected.
) p.76
Note:
• The default print density can be set on the Admin. Screen.
The factory default is set at level 3 (Standard).
) p.193
Press the or key to adjust the
print density.
1)
Adjusting the print density used for Print Drum
(Cylinder) 1
2)
Adjusting the print density used for Print Drum
(Cylinder) 2
3)
Print Density Adjustment Indicator
Shows the current setting of the print density.
4)
Key
Increases the print density incrementally.
5)
Key
Decreases the print density incrementally.
1 2
5 4
3