Rishabh RISH CON - Hz, Operating Manual, Page: 31 / 60

value will wrap from 9 round to
0.Pressing the “ Up” key will
advance the operation to the next
digit and set the third digit, in this
case to “5”.
Enter New / Change
Start
value
of the Output 2, third digit
entered, prompting for fourth
digit. (*denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the fourth digit
from 0 through to 9, the value will
wrap from 9 round to 0.
Pressing the “ Up” key will advance the operation to the
“New/Changed
Elbow
value of the Output 2” confirmation
and set the fourth digit, in this case to “0”.
New/changed
Start
value of the
Output 2
confirmed.
Pressing the “ Down” key will re-enter to the “New /
Change
Start
valueof the Output
2”.Pressing the “ Up” key will
confirm New
Start
value
of the Output 2 and advance to
the Elbow value of Output2
setting (section 3.1.5.2.3) or exit
setup menu, If elbow not
enabled.
third digit from 0 through to 9, the
Ù
Ú
Ù
Ú
Ù
29
ON O/P1 O/P2 COM
O/P 2
*
ON O/P1 O/P2 COM
O/P 2
*
ON O/P1 O/P2 COM
O/P 2