Rishabh RISH CON - Hz, Operating Manual, Page: 22 / 60

Pressing “ Up” key will confirm the present value as Elbow
value of the Input and advance to the Output Characteristics
setting (section 3.1.5).
New / Change Elbow value of the Input
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the first digit
from 4 through to 6, the value will
wrap from 6 round to 4 depending
on the set End value of Input.
Pressing the “
Up” key will
advance the operation to the next digit and set the first digit,
in this case to “5”.
Enter New / Change Elbow value of the Input, first digit
entered, prompting for second digit. (*Denotes that digit will
be flashing).
Pressing the “ Down” key will
scroll the value of the second
digit from 0 through to 9, the
value will wrap from 9 round to 0
depending on the set End value
of Input.
Pressing the “
Up” key will
advance the operation to the next
digit and set the second digit, in this case to “5”.
Enter New / Change Elbow value of the Input, second digit
entered, prompting for third digit. (*Denotes that digit will be
flashing).
Ù
Ú
Ù
Ú
Ù
ON O/P1 O/P2 COM
A
A
INPUT
*
ON O/P1 O/P2 COM
A
A
INPUT
*
20