Rish Clamp ES1000AC, User Manual, Page: 22 / 32

20
14 Temperature Measurement
Multimeter allows you to measure temperature with K-type
0 0
thermocouple (NiCr-Ni) in the range 0C to +1300C.
0
Set the function selector switch to “ C ”.
Connect the sensor as shown below.
K-type
sensor
/%
V~
Press
yellow key Press
yellow key
Press
yellow key Press
yellow key
15 Non contact voltage (NCV) detection
Non contact voltage detection allows detection of AC voltage
from >75V 50Hz/60 Hz simply keeping the jaw of the clamp
meter near the voltage carrying conductor.
Presence of voltage is indicated by the beep sound.