6
If your receiver has antenna
wires that need to be
routed to the antenna
mounts, remove the frame’s
bottom plate.
Place the receiver as far
forward as possible on the
battery tray. Route the
antenna wires down through
the holes on the side or in
the front of the frame and
over to the antenna mounts.
FLIGHT CONTROLLER SETUP
Download the LibrePilot
Ground Control Station app
(GCS) from http://www.
librepilot.org/ from the
software downloads section.
Warning:
Always remove the
props before connecting the
flight controller to the GCS.
To set up the CC3D flight
controller to use your
transmitter, you will need
a mini - USB cable to
connect the cc3d controller
to the GCS app, a charged
flight batter y, and the
transmitter must be set up
with the new model and
linked to the receiver.
Open the GCS app and
connect the RXS255 with
your mini-USB cable. When
the communication window
shows that the flight
controller is connected to
the GCS app, click on the
configuration button.
