Rise R653, User Manual

Page: 30 / 36

_________________________________
【 【 【 【
3
】 】 】 】
On-chip Primary PCI IDE
Enable: Use the on-board IDE (default)
On-chip Secondary PCI IDE Disable: Turn off the on-board IDE.
PCI Slot IDE 2nd Channel Choose Enabled (default) or Disabled. When
Enabled is set, IRQ 15 is dedicated for secondary
IDE use. When Disabled is set, IRQ 15 is released
for other devices.
USB Controller Enable or Disable USB Function.
Onboard FDD Controller Enable: Use the on-board floppy controller
(default).
Disable: Turn off the on-board floppy controller
Onboard Serial Port 1 Choose Serial port 1 & 2's I/O address. Do not
Onboard Serial Port 2 set port 1 & 2 to the same value except for
Disabled.
COM 1/3F8H COM3/3E8H
COM 2/2F8H COM4/2E8H
(default)
UR2 Mode
UR2 function, If your device is Mouse or Modem
choose Standard (default).
If you have IR device connect to IR connector,
choose other options IrDA 1.0, ASK IR, MIR
0.57M, MIR 1.15, FIR depends on your IR device.
UR2 Duplex Mode
If UR2 Mode item is not set Standard, this item
will present. Choose Half (default) or Full for UR2
Duplex Mode.
Onboard Parallel Port Choose the printer I/O address:
378H/IRQ7(default), 278H/IRQ5, 3BCH/IRQ7.
Parallel Port Mode Choose SPP(default), EPP, ECP, ECP+EPP Mode,
The mode depends on your external device that
connects to print port.
ECP Mode Use DMA If Parallel Port Mode item is set ECP or ECP+EPP
this item will present. Choose DMA Channel 3
(default) or 1 for ECP Mode.
______________________________________________________________
3-13