Rise R653, User Manual

Page: 26 / 36

_________________________________
【 【 【 【
3
】 】 】 】
PM Control by APM Choose Yes or No (default). APM stands for advanced
Power Management. To use APM you must run
"power.exe" under DOS V6.0 or later version.
Video Off Method Choose V/H Sync + Bland (default), Bland screen, or
DPMS for the selected PM mode.
Doze Mode
When the set time has elapsed, the BIOS sends a
command to the system to enter doze mode. Time is
adjustable from 1 Min to 1 Hour.
Standby Mode The default is Disabled. Time is adjustable from 1 Min
to 1 Hour.
Suspend Mode The default is Disabled. Only an SL-Enhanced (or SMI)
CPU can enter this mode. Time is adjustable from 1 Min
to 1 Hour. Under Suspend mode, the CPU stops
completely (no instructions are executed).
HDD Power Down When the set time has elapsed, the BIOS sends a
command to the HDD to power down, which turns.
off the motor. Time is adjustable from 1 to 15 minutes.
the default setting is Disabled. Some older model HDDs
may not supports this advanced function.
IRQx (Wake-Up The BIOS monitors these items for activity. If activity
Events)
occurs from the Enabled item the system wakes up.
Power Down The BIOS monitors these items for no activity. If no
Activities
activity occurs from the Enabled item the system will
enter power saving mode (Doze/Standby/Supend/HDD
Power Down mode)
3. After you have finished with the Power Management Setup, Press the
<ESC> key to return to the Main Menu.
______________________________________________________________
3-9