16
Editing an NVR
You can edit a selected NVR and add or remove cameras from the NVR.
To edit an NVR:
1.
From the NVR page, click the NVR Name; the Edit NVR screen opens.
Figure 16 Edit NVR Screen
Field
Description
Name
Change the name of the NVR, if required
Firmware
Click Check to confirm if a new firmware version is available.
Local Access
Click Set and then select UI/CGI to enable access to
the NVR’s web
interface for a time period of 60 minutes.
NOTE:
You can delete the NVR from the site by clicking Delete NVR from the
bottom right of the screen.
RVNVR080020
