4
PoE Camera Settings
Note
This camera can be connected to RISCO Cloud only via the VUpoint NVR
Step 1
Connect one end of the network cable (LAN) to the camera Ethernet port and the other side to
your router or an NVR PoE Port. If the camera is not connected to PoE, power it up by an
appropriate power supply.
Step 2
Use the VUpoint NVR instructions to connect the camera to the NVR using “RISCO
Pro
”
Camera type.
Product Specification
Parameter
Description
Image Sensor
1/3” 4Megapixel progressive
CMOS
IR Distance
30 m
Focal Length
2.8 mm
WDR
120 dB
Firmware Upgrade
Via the camera’s web interface
Power Supply
12V DC/POE
Power Consumption
<6.6W
Operating Conditions
-
40◦C to 60◦C
(-
40◦F to 140◦
F)
/ less than ≤ 95%
Storage Temperature
-
40◦C to 60◦C
(-
40◦F to 140◦
F)
Protection
IP67
