105
Set Night Mode
Night Mode is used when the activation of a device follows the triggering of an
event condition only during nighttime. For example, switching on a light switch
during the night.
You can set specific time parameters to designate Night Mode.
1.
From the Rules screen above , click
the “Set Night Mode” button
; the following
screen is displayed.
Note:
Night Mode is from At Sunset to At Sunrise, by default.
Figure 115: Set Night Mode Screen
2.
Under
“
Night Starts/Ends
”
, click the arrow and select an option that defines
when Night starts/ends.
3.
Click the “SAVE” button
To Set Night Mode according to specific times:
1.
Click
“At’
; the following time frame screen opens:
