64
The tripped zones that are identified by the Security System will be listed in the
RisControl screen. These zones indicate that the zones are responsive and are,
therefore, detectable.
4.
When done, click the “Finnish Walk Test” button
.
Note:
If the
“Finnish Walk Test” button
is not clicked, the Walk Test will terminate
automatically at the end of the 60-minute period.
Sounder Test
1.
Click the “CHECK” button to enter the “
Siren
Test”.
Figure 66: Siren Test Screen
2.
Click the “Siren Test” or the “Strobe Test” button to perform the test.
Service Mode
Activating “Service” mode silences all tamper alarms from detectors and
accessories for an installer-defined period of time. During this time, you can
replace wireless detector and accessory batteries without tamper alarms sounding.
1.
Click the “ACTIVATE” button to activate “Service Mode”.
2.
Replace the device batteries, as required.
Anti-Code
Some of the End-User's activities cannot be performed without permission from
the installer. The "Anti Code" feature allows the installer to approve specific
activities to the end-user without having to physically visit the site. When this
permission is required, the end-user initiates a phone call with the installer after
