24
Lock Screen with Quick Arm and/or Quick Stay
The RisControl is always assigned to only one partition and can also be masked to
other partitions, via the Installer Programing of the Security System.
The partition that is assigned to the RisControl can be set (via the Installer
Programming Menu) to allow Quick Arm and/or Quick Stay. The Lock Screen
displays Quick Arm and/or Quick Stay icons that indicate when they are enabled,
allowing anyone to directly arm the system from the Lock Screen without having
to enter a PIN Code.
Figure 20: Lock Screens with Quick Arm and/or Quick Stay
RisControl’s
Assigned Partition Status
- Assigned Partition status is always
indicated at the top left corner of the Lock Screen
and by the color of
the arc at the middle of the Lock Screen, as follows:
•
Green
–
assigned partition is disarmed
•
Orange
–
assigned partition is in Stay Mode
•
Red
–
assigned partition is armed
User’s functionalities in the Lock Screen
–
User can perform any of the following
functionalities in the Lock Screen:
•
Click the
“
Quick Arm
”
or
“
Quick Stay
”
button
–
this will immediately arm
(full arm or stay arm) the partition that the RisControl is assigned to, without
having to enter
a PIN Code. If the partition is set with an “Exit delay”, then the
progress of the Exit Delay timer will be indicated on the lock screen.
•
Click the
“
Quick Stay
”
button
- this will immediately arm the partition that
