Engineer Programming
Page
61
1 System
The System menu provides access to submenus and their related parameters that are used for
programming configuration settings applicable to the entire system.
After you access the System menu from the main Engineer Programming menu, as described
in this section, you can access the following sub-menus:
Timers, page 61
Controls, page 65
Labels, page 61
Sounds, page 80
Settings, page 81
Auto Clock, page
Service Info, page 83
Firmware update, page 84
Timers
The Timers menu contains parameters that specify the duration of an action.
Access and configure the parameters in the System Timers menu, as follows:
System: Timers
Quick Keys
Parameter
Default
Range
Exit/Entry Delay 1
Exit/Entry delays (Group 1).
Entry Delay 1
30 seconds
01-255 seconds
Duration of entrance delay 1.
Exit Delay 1
45 seconds
01-255 seconds
Duration of exit delay 1.
Exit/Entry Delay 2
Exit/Entry delays (Group 2).
Entry Delay 2
30 seconds
01-255 seconds
Duration of entrance delay 2
