Page 6
Note: If a Global code (Master or Main) has been used, all areas that are being set will be Part 1 set.
Note: If an Area Main code has been used only Part 1 set for that associated area will occur.
Note: Your installation company will have informed you what zones are being removed (omitted) for the
Part Set you are using. Refer to the System Attributes section for what zones have been programmed as
Part Set zones.
4) The exit tone may or may not be heard depending on the system settings.
5) Exit the premises or retire to an unprotected part of the system. At the end of the exit time either the exit
sounder will stop, or a single beep will be emitted (depending on system settings).
Quick Part Setting System
If required there is a quick method to Part Set the system regardless of the level of code being used (except
Control Level). To Part 1 Set the system Enter YES, YES CODE. The system will now start to Part 1 Set.
For Setting and Part Setting the System with Area Code, please refer to the
FULL User Manual
Viewing the Event Log (Master code only)
1) With the display showing:-
2) Enter a
Master Code
, the display will show, for example:-
3) Press
NO
three times, the display will show:-
4) Press YES, the display will show, for example:-
5) This is the most recent event in the log.
Whilst viewing the Log,
Pressing NO will move back to the previous event. Pressing YES will move forward to the next event.
Pressing 7 will take you to back to the last event of the previous day.
Pressing 9 will take you forward to the first event of the next day.
Whilst viewing a zone descriptor pressing 5 will show the zone number
6) When you have finished viewing the Log press 0 twice the display will show:-
01 JAN 19 : 58 : 01
Do you want to . .
SET the System ?
Do you want to . .
View the LOG ?
Read Log
01 JAN 19 : 58 : 01
01 JAN 19 : 58 : 01
