RIPSpeed DV720 Owner'S Manual Download Page 4

Page: 4 / 18

Preparation

Please read all of the instructions before beginning the installation. We recommend having your unit
installed by a credible installation shop.

Features

• Single DIN size, all-in-one integrated entertainment system.
• Built-in DVD Player, automotive specification slot loading mechanism.
• Built-in RDS FM/AM Tuner.
• High resolution 7” (16:9) TFT color monitor, contrast and brightness adjustment, with LCD dot
matrix display.
• Built-in 40W X 4 amplifier, 4.1 channel surround sound output.
• Turn out and slot-in panel structure.
• Smart Touch-screen operation.
• Buttons and Encoder operation.
• Steering wheel button operation interface.
• All functions can be operated by included Remote Controls.
• Standby mode.
• Powerful Graphic User Interface and software update ability.

Tools and Supplies

You will need these tools and supplies to install your unit.
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Multimeter
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
• Heatshrink tubing
• Soldering iron and solder

WARNINGS

1. Only connect the unit to a 12-volt negative ground system.
2. Never install this unit where operation and viewing could interfere with safe driving conditions.
3. To reduce the risk of a traffic accident (except when using for rear view video camera) never use
the video display function while driving the vehicle. This may be in violation of local laws.
4. To reduce the risk of a traffic accident, never driving with the sound at a level that prevents you
from hearing sounds outside around the vehicle.
5. Never disassemble or adjust the unit without the assistance of a professional. For details, please
consult your local car stereo specialty shop.
6. To prevent injury from shock or fire, never expose this unit to moisture or water.
7. Never use irregular discs, the only recommended disc size is a 12cm round disc.
8. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.
9. Do not change the fuse on the power wire without professional guidance. Using an improper fuse
may cause damage to the unit and result in a fire.
10. The monitor employs an automatic motorized mechanism. To prevent damage to the core
mechanism, please do not push, pull or swivel the monitor manually.

Disconnecting the Battery

To prevent a short circuit, turn off the ignition and remove the negative (-) battery cable prior to
starting the installation.

NOTE:

If the unit is to be installed in a car equipped with an on-board drive or navigation computer,

do not disconnect the battery cable. If the cable is disconnected, the preset memory may be erased.
Under these conditions, use extra caution during installation to avoid causing a short circuit.

NOTE:

It is especially important that you read the

WARNINGS

and

NOTES

in this manual.

Controls and Indicators

Button Operation

1. POWER/VOL

Rotary encoder.
Press the encoder to turn on the unit, press and hold to turn off.
Rotate clockwise/counterclockwise to adjust the volume.
Press to enter the audio adjust menu when the unit is on.

2. MUTE

Press the MUTE button to mute the volume, and press the button again to restore the volume.

3. FAST REVERSE

Fast reverse play the disc content in DVD mode .
Press to tune frequency backward one step in TUNER mode.

4. FAST FORWARD

Fast forward play the disc content in DVD mode
Press to tune frequency forward one step in TUNER mode.

5. PLAY/PAUSE

Press to play/pause.
Press to scan radio stations stored in the 6 preset channels in TUNER mode

6. STOP

Stop playback in DVD mode.
Select FM/AM band in TUNER mode

7. PREVIOUS

Select the previous chapter/track for playback.
Seek an available radio station by decreasing tuning frequency