RIPSpeed DV720, Owner'S Manual, Page: 17 / 18

Troubleshooting
1. When using the remote for the first time, you must pull out the insulation tape.
2. Remove the battery if the remove control is not used for a month or longer.
Remove and dispose of the old battery immediately.
Do not store the battery with metallic materials.
3. Inserting/Replacing the Battery:
Remove the battery holder
Remove the battery from the battery holder
28 27
Troubleshooting
Error Messages
Problem Cause Corrective Action
Loading
No Disc
Bad Disc
Unknown disc
Region Error
Error
Disc is being read
Disc is dirty
Disc is upside down
Disc not present in loading
compartment
Disc is dirty
Disc is upside down
Disc is scratched and can’t be
used again
Disc format is not compatible
with this unit
DVD is not compatible with
region code of unit
illegal mechanism operation
Clean disc with soft cloth
Insert disc with label side up
Insert disc
Clean disc with soft cloth
Insert disc with label side up
Change a new one
Press EJECT key for 5 seconds to reset
loading mechanism
Remote control
Remote control does
not function
Battery is covered with
insulation tape
Battery depleted
Battery installed incorrectly
Pull out the insulation tape
Replace battery with new one
Remove battery and install correctly
PBC cannot be used
during VCD playback
No repeat or
searching while
playing VCD
MP3
Interruption occurred
during playback
Incorrect playback
message displayed
Disc is inserted upside down
PBC is not available on the
disc
PBC is on
Disc is dirty or scratched
File is damaged/bad recording
Message is longer than LCD
can display
Insert disc with label side up
Turn PBC off
Clean disc or replace
Recreate disc with good files
Problem Cause Corrective Action
Disc does not play
back
Image blurred,
distorted, or dark
Disc is illegally copied Use original disc
Use disc with proper region cod
Disc region code is not
compatible with unit