background image

6

Press the 

UP/DOWN

buttons and the display will show 

use the 

UP/DOWN

button to adjust the current to that

required.

Press the 

SET/STOP

button to confirm the new charge/

discharge current and to return to the charge/discharge 
display.

NOTE:

That it is possible to increase the charge rate above that

allowed in the manual parameter setup for Ni-MH cells. Great
caution should be taken if this is done as some of the lower
quality Ni-MH cells will not tolerate charge rates greater than
1C. (Charge rate equal to the capacity of the battery being
charged).

Choose either ‘On’ or ‘Off’ by pressing the 

UP 

or 

DOWN 

buttons.
If you choose ‘On’, the audible warning will sound every 
time the buttons are pressed, if you choose ìOffî no audible
warning will be given.

Press 

SET/STOP 

to exit this function.

SOUND FUNCTION (CONT…)

To  check details of the input voltage, output voltage,
charge/discharge time etc whilst charging, press the 

UP

and 

DOWN 

buttons simultaneously. Then by pressing the 

UP

or 

DOWN 

buttons it is possible to scroll through all the 

displays step-by-step.

Characters used:

Va: – Average voltage
Vc: – Discharge cut-off voltage
Vi : – Input voltage
Vo: – Output voltage
Vp: – Peak voltage
Vs: – Discharge start voltage

DATA REFERENCE DURING CHARGING/DISCHARGING

Changes to the charge/discharge current are only possible
when manual charging/discharging.

When the battery is being charged the following screen will be
displayed.

ADJUSTMENTS POSSIBLE DURING CHARGING/DISCHARGING

ADJUSTMENTS POSSIBLE DURING CHARGING/DISCHARGING

Distributed by: Ripmax Plc. Ripmax Corner, Green Street, Enfield, EN3 7SJ.

Tel: 020 8282 7500  Fax: 020 8282 7501

Email: [email protected]  Web Site: http://www.ripmax.com

Made in Korea

SuperNova 250S Inst.Update  17/11/03  10:46 am  Page 6

Reviews: