5
The audible warning sound can be switched on or off using
this function.
Press
SET/STOP
and the display will show.
Press
UP
button and the display will show.
Press
SET/STOP
and the display will show.
Press
SET/STOP
and the display will show.
Press
DOWN
and the display will show.
Press
SET/STOP
and the display will show.
Choose either ‘Yes’ or ’No’ by pressing the
UP
or
DOWN
button.
If you confirm ‘Yes’ by pressing the
SET/STOP
button, all of
the selected values will be erased and the factory set values
will be reinstated.
If you confirm ‘No’, none of the settings will change.
Press
SET/STOP
and the display will show discharge
current–NiCd and Ni-MH can be discharged from 0.5 to 3.0A in
0.1A increments, Pb cannot be discharged using this program.
Press
SET/STOP
and the display will show.
Press the
UP
button and the display will show.
Press the
SET/STOP
button and the display will show,
use the
UP/DOWN
buttons to scroll to the ‘START BATTERY’
screen.
Press the
SET/STOP
button to show,
then press the
UP/DOWN
buttons to commence charge/
discharge on the just set memory. Charging/discharging can
be stopped at any time by pressing the
SET/STOP
button.
SOUND FUNCTION
SETTING BATTERY PARAMETERS (1-10 MEMORIES) (CONT…)
If after setting the memory parameters, you wish to revert to
the factory pre-set values, this can be done quickly and easily
by using the Memory All Clear function.
Press
SET/STOP
followed by the
DOWN
button, the display
will show.
MEMORY ALL CLEAR FUNCTION
MEMORY ALL CLEAR FUNCTION (CONT…)
SuperNova 250S Inst.Update 17/11/03 10:46 am Page 5
