01/18
26
5.8
Unclogging a drain
Attention!
Ensure that the spraying nozzle does not leave the drain!
Water under high-pressure may cause severe injuries!
1.
Screw a suitable nozzle onto the high-pressure hose.
2.
Unwind the hose (
see chapter7.1 "Hydraulic reel control" page.: 41
3.
Put the nozzle into the drain that is to be cleaned.
4.
Screw the high-pressure regulator (
) fully open (right).
• Use an input guide support and / or a “Hose inlet guid-
ance rolls” to protect the outer jacket of the HD-tube
against damage.
Control
1.
Open the high-pressure valve.
2.
Screw the pressure regulator fully to the right.
Control on machine with control box:
3.
Press button C (HP pump On).
4.
Press button D (Throttle open).
i
Summary of Contents for flexJET
