RIB2312 Sapphire Gas Log Flame Fire
- 17 -
1/03/18 ©Rinnai
CAUTION
240 Volt exposure. Isolate the electrical supply to the appliance and reconfirm with the
neon screwdriver or multimeter. Disconnect gas supply.
All work should be carried out by qualified service technician
7)
Removal of Pilot Assembly
a. Remove Pilot Head and clean or replace Pilot
Injector. Slide clip to left and left head. (Refer to
Image 9).
Image 9
a. Remove Pilot Bracket 2 x screws.
b. Remove Pilot Bracket 2 x screws. (Refer to
Image 10).
c. Remove pilot front shield 2 x screws one each
end. This allows access to Electrode and Flame
Rod. (Refer to Image 11).
Image 10
Image 11
