Rinnai
5
Portable Room AC OIM
WARNING
WARNINGINFORMATIONREGARDINGAPPLIANCESWITHR290REFRIGERANTGAS
Thoroughly read all of the warnings.
This appliance contains up to 210g of R290 refrigerant gas.
This appliance uses R290 refrigerant, which is class 3 flammability and must be handled by a refrigeration
mechanic with appropriate Australian refrigerant handling licence.
The appliance must be installed, used and stored in a ventilated area that is greater than 11 m
2
�
When cleaning the appliance, do not use any tools other than those recommended by the manufacturing
company�
DO NOT
use means to accelerate the defrosting process or to clean, other than those recommended
by the manufacturer�
The appliance must be placed in an area without any continuous sources of ignition (for example: open
flames, gas or electrical appliances in operation).
DO NOT
puncture and
DO NOT
burn�
Refrigerant gases can be odourless.
If the appliance is installed, operated or stored in a non-ventilated area, the room must be designed to
prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the
refrigerant caused by electric heaters, stoves, or other sources of ignition.
Compliance with national gas regulations shall be observed. Keep ventilation openings clear of
obstruction.
A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds
to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current
valid certificate from an industry-accredited assessment authority, which authorises their competence to
handle refrigerants safely in accordance with an industry recognised assessment specification.
Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled personnel shall be carried out under the supervision of the
person competent in the use of flammable refrigerants.
The appliance
MUST BE
stored in such a way as to prevent mechanical failure.
Repairs must be performed based on the recommendations from the manufacturing company.
Maintenance and repairs that require the assistance of other qualified personnel must be performed
under the supervision of an individual specified in the use of flammable refrigerants.
IMPORTANT
MANDATORY INSPECTION PRIOR TO INSTALLATION
Immediately report any damage or discrepancies to the Supplier of the appliance. This appliance was
inspected and tested at the time of manufacture and packaging, and released for transportation without
known damage. Upon receipt, inspect the exterior for evidence of rough handling in shipment. Ensure
that the appliance is labelled correctly for the gas and electrical supply, and/or other services it is intended
to be connected to�
For safety and warranty purposes, appliances that may be damaged or incorrect
MUST NOT
be installed
or operated under any circumstances. Installation of damaged or incorrect appliances may contravene
local government regulations. Rinnai disclaims any liability or responsibility whatsoever in relation to the
installation or operation of damaged or incorrect appliances.
NOTE
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your indoor unit
may vary slightly from that which is shown in this manual.
SAFETY & IMPORTANT INFORMATION
