Rinnai 13
Portable Room AC OIM
COOL
1�
Press the ON/OFF (1) button.
2�
Press the mode selection (5) button until the COOL mode indicator
is illuminated.
3�
Use temperature buttons (4) to select the desired temperature (16°C to 32°C)
4�
Use fan speed button (3) to select the desired fan speed (AUTO, LOW, MED or HIGH).
5�
Press the ON/OFF button (1) to stop operation.
DRY
1�
Press the ON/OFF (1) button.
2�
Press the mode selection button (5) until the DRY mode indicator is illuminated.
3�
Use temperature buttons (4) to select the desired temperature (16°C to 32°C)
4�
Press the ON/OFF button (1).
FAN
1�
Press the ON/OFF button (1).
2�
Press the mode selection button (5) until the FAN mode indicator
is illuminated.
3�
Use fan speed buttons (3) to select the desired fan speed (LOW, MED or HIGH).
NOTE
AUTOfanspeedisnotavailableonFANmode.
4�
Press the ON/OFF button (1).
NOTE
Themostrecentbasicoperationalsettingsarestoredintheappliancesmemory.
If the appliance is not disconnected from the mains power supply then these setting will be
availablethenexttimetheapplianceisturnedonviatheON/OFFbutton.
OTHER OPERATION
FILTER RESET
When filter reset indicator light on, it means the air filter should be cleaned.
After cleaning the air filter, press the Filter Reset button to reset the countdown timer, the indicator light off.
NOTE
Thefiltercleanreminderisforgeneralusepurpose;Ifperiodsofheavyuse,airfiltersshouldbe
checkedandcleanedeveryweek.
SLEEP
The SLEEP function allows the set temperature to increase
and decrease over an 8 hour period at pre-set time intervals
to maintain your comfort while saving energy after the 8 hours
has passed the appliance will resume normal operation.
NOTE
Sleep mode is not available in FAN only and
DRY mode
C°C = Set cooling temperature
1
Sleep mode 8 hours
0.5
8
1°C
Set temp
1°C
Sleep Mode Finishes
Sleep Mode
Starts
0
OPERATION
