Rinnai RH-993CT, Use And Care Manual

Page: 9 / 13

Fig.C Fig.D
• FUNCTION KEYS: (Fig.8)
A = OFF
B = SPEED I / OFF
C = SPEED II / OFF
D = SPEED III / OFF
E
= LIGHT
• If your appliance does not have the INTENSIVE speed function, press key
A for two seconds and it will be activated for 15 minutes after which it will
return to the previously set speed. If the function program of the unit is
active the LED will flash.
By pressing any key except the key for the light, the hood will return
immediately to its normal functioning.
The “automatic stop timer” mode delays stopping operation of the hood,
the mode will continue functioning for 15 minutes at the operating speed
set at the time this function is activated.
FUNCTION KEYS: (Fig.10)
A == OFF
B == SPEED 1/“
－
”Control
C == SPEED 2/“
＋
”Control
D == SPEED 4
E == LIGHT
By pressing key B
、
C or D individually, the speed for each key will be the
same as above table. At the same time indicated light will flash on the each
function key button. To stop the speed function press key A.
If Speed 3 is required
，
press key C adjust“
＋
”. At Speed 3 program both key
B and key C indication light will flash on each function key button.
To on the light press key E. To off the light press key E again.
•FUNCTION KEYS: (Fig.9)
A= TIMER – 15 MINUTES
B= SPEED I
C = SPEED II
D
= SPEED III
E =LIGHT