2
Operating Instructions
l
To start using, open the tap at heater outlet and then inlet valve to fill in the
tank, when the tank fulfilled, water will come steadily out of the tap. Close
the outlet tap now.
l
Plug in the power supply and press reset of the ELCB switch till indicator
goes on.
l
Turn on power knob and select which wattage will use (500W, 1000W,
1500W selectable).
l
Select maximal water temperature with turn temperature knob clockwise to
low, medium or high temperature. (if after selected max water temperature
the lamp indicator not goes on please select water temperature to be higher).
l
Hot water operations: After the electrical water heater normally works and
the heats for a long period of time, you can use the hot water in the tank, you
need mixed water valve to mixing hot water and cold water, as your proper
temperature after finishing uses, shut off the mixed water valve.
Cautions:
Ø
When adjusting the water temperature of the water exiting mouth, the
shower must not spray directly to the human body; you should test the
water temperature first to avoid burning or damages.
Ø
Temperature setting: According to your required temperature, rotate the
temperature adjusting knob by the clockwise direction. You can select to
use the heating temperatures with grades in the temperature ranges of
thirty to seventy five degrees Celsius from closing to the low, medium and
high bands or from low to high.
Ø
Power selecting: This unit offers three power band for your selections.
Band 1: 500W, Band 2 : 1000W, Band 3 : 1500W.
7
Part Names
l
Frequently checking the connection of power source’s plug and the outlet is
in good condition. The plug’s outlet is well connected the ground or not.
l
When it isn’t operated for a long period of time, typically in the low
temperature zones, you must empty the tank to avoid the water freeze in the
tank which will cause the tank damage.
l
In order to assure the electrical water heater work with high efficiency, you
had better clean the heating parts once a year. Remove the water dirt’s
deposits accumulated on the electrical heating parts and the tank base.
Daily and Common Maintenance
Machine body
Hot water
outlet pipe
Power source wire
with electricity
leakage protection
Drainage pipe joint
Temperature
selector switch
Temperature
indicator
Indicator lamp
Wattage Selector Switch
Pressure-relief valve
Plug
