Rinnai Australia
28
Ultima II Installation Manual
SPECIFICATIONS
PRODUCT SPECIFICATIONS
Model: REH-311FTB INBUILT / REH-311FTC CONSOLE
Name: Ultima II INBUILT / CONSOLE
Rinnai reserves the right to change or modify specifications without notice.
DIMENSIONS
*The total installation depth includes the dress guard and where applicable the rear cover kit.
General description:
Rinnai Ultima II
Radiant / Convector, Forced Exhaust, Fully Automatic Space Heater.
Gas input rate:
Natural Gas
Propane
High (MJ/hr):
30
30
Low (MJ/hr):
15
15
Gas control:
Rinnai Electronic control with Rinnai Solenoid Valves
Burners
Stainless Steel Ribbon Type
Gas Inlet:
Barrel Union / Flare Fitting (15 mm flare connection)
Test Point Pressure:
High (kPa)
0.98
2.15
Low (kPa)
0.26
0.56
Flue System:
Forced exhaust, for twin skin flue or fireplace installation
Fan:
Tangential 3 speed 32 Watt rating
Flue Termination:
An approved 100 mm cowl must be fitted to all installations.
Combustion Fan:
2 - pole shaded pole induction motor (with revolution detection)
Sirocco fan (240 V)
Ignition system:
Electronic automatic ignition
Power Supply:
240 V / 50 Hz. Heater is fitted with a supply lead and 3 pin plug.
Replace only with Rinnai Part Number 90192303.
Data Plate:
Bottom left hand side, behind front panel.
Installation type:
Console or Inbuilt
Weight:
Console: 41 Kg. / Inbuilt: 38 Kg.
Legend
CONSOLE
A
910 mm C
265 mm
E
13.6 mm
G
600 mm
I
114 mm
K
Total Installed Depth*
B
653 mm D
24 mm
F
93 mm
H
280 mm
J
393 mm
404 mm
INBUILT
A
910 mm C
140 mm
E
138.6 mm
G
600 mm
I
114 mm
K
Total Installed Depth*
B
653 mm D
24 mm
F
93 mm
H
280 mm
J
393 mm
164 mm
A
C
D
K
E
J
G
H
F
B
C O N S O L E
I
F
I
G
J
H
K
C
D
E
IN B U ILT