Rinnai
10
ORH OIM
INSTALLATION METHOD
1. Open the packaging and carefully take the heater out and inspect for any damage.
2. Determine the mounting position for the heater, refer to "Approximate Heating Area" on page 8 "Outdoor
Radiant Heater Mounting" on page 8 and 9 to assist with the location of the heater.
3. Set the adjustable angle mounting brackets (2.) to desired angle:
For ceiling mounted installations the available mount angles are restricted to 0°, 15° and 30° only.
For wall mounted installations the available mount angles are restricted to 15°, 30° and 45° only
.
4. Mark the position of the two brackets, using the following minimum recommended bracket spacing below to
determine the correct location.
Dimension (mm)
ORH15S
ORH18M
ORH24L
ORH32XL
A
530 ± 50
710 ± 50
990 ± 50
1400 ± 50
5. Install the brackets onto the nominated surface or structure using appropriate
screws suitable for the
mounted surface material and able to support more than double the weight of the heater being installed, refer
to
on page 6.
6. Hang the heater on the brackets and
secure in place with the mounting bracket locking plates
0°
15°
45°
30°
Ceiling
W
all
A
INSTALLATION
A
B
A
B
by tighting bolts labelled A first, then B as indicated below.