Rinnai
18
HW_CF OIM
Altitude Setting REU-VCM ONLY
IMPORTANT
REU-VCM
models are suitable for installation locations higher than 1000 metres above sea level
such as alpine areas. To ensure proper appliance operation the installer
MUST
select one of the
two available altitude ranges for the appliance these are:
'DEFAULT'
suitable for installation locations that are from 0 to 900 metres
above sea level.
'HIGH'
suitable for installation locations that are from 901 to 1800 metres
above sea level, as would be typical of installations located in alpine areas.
Refer to "Commissioning Instructions" located inside the appliance front
cover for details.
OFF ON
DipSW1
6
OFF ON
DipSW2
6
Default
OFF ON
DipSW1
6
OFF ON
DipSW2
6
High
HOT WATER DELIVERY TEMPERATURE
WARNING
This appliance may deliver water at high temperature. Refer to the Plumbing Code of Australia
(PCA), local requirements and installation instructions to determine if additional delivery
temperature control is required.
Local regulations and or the requirements of AS/NZS 3500
MUST
be addressed regarding the temperature
areas may be limited to 50°C or less. To ensure these regulations and or requirements are met the system
MUST
WARNING
This appliance
MUST
control is inadequate.
is
IMPORTANT
If the appliance is to deliver water primarily for the purposes of personal hygiene in an early
childhood centre, primary or secondary school, nursing home or a similar facility for the care of
(TLD), such as a Tempering Valve may be required even if the appliance is set to 50º C or less. For
these types of applications contact Rinnai.
50º C
KITCHEN
Water controller
(optional)
Water controller
(optional)
Water controller
(optional)
Water controller
(optional)
LAUNDRY
BATHROOM
ENSUITE
Diagram 1 : 50°C Appliance
KITCHEN
Water controller
(optional)
Water controller
(optional)
LAUNDRY
BATHROOM
Water controller
(optional)
Water controller
(optional)
ENSUITE
TLD
Diagram 2 :
NOT
a 50°C Appliance
NOTE
Minimum length of pipe from hot outlet
to nearest hot water tap 2 metres.
NOTE
TLD = Temperature Limiting Device.