4
Rinnai New Zealand
Infi nity Solar 20 & 24 Op / Install: 02-08
Features and Benefi ts
The Rinnai Infi nity Solar continuous fl ow water heaters provide hot water even during
times of limited solar radiation and/or high hot water demand. Whilst the electricity, water
and gas supply are connected, hot water is available whenever hot water taps are open.
The Rinnai Solar range of continuous fl ow water heaters are power fl ued appliances. This
makes them compact saving both fl oor and wall space.
The temperature of hot water output from the Rinnai Infi nity is CONSTANTLY MONITORED
by a built-in sensor. If the temperature of the hot water output from the Rinnai Infi nity
rises to more than 3
o
C above the preset temperature the burner is switched OFF and then
switched ON again when the temperature falls below the selected temperature.
Ignition is electronic, so there is no pilot light. When the hot water tap is off, no gas is
used.
Operating noise level is very low.
•
•
•
•
•
Important Information
Always check the water
temperature carefully before
use. Refer to the Warning
about Hot Water on page 1 of
this manual for important safety
information.
At low water fl ows, the hot
water unit may extinguish
without warning. Opening the
tap further will restart the
appliance.
Do Not touch the unit cover or the
fl ue outlet.
Do Not insert objects into the fl ue
outlet.
On colder days steam may discharge
from the fl ue outlet. This condition is
normal for high effi ciency appliances
and does not indicate a fault.
Keep fl ammable materials,
spray cans, fuel containers, pool
chemicals, trees, shrubs, etc.
well clear of the fl ue outlet.
Do Not spray water directly into
the fl ue terminal.
If freezing conditions are
expected, ensure the electric
power supply to the solar gas
booster remains ON. This will
ensure the automatic anti-
frost protection can operate
when required (LPG models
only).