background image

Rinnai 

HOTFLO (HFE Series) Electric Storage Water Heater OIM

SAFETY

WARNING

Thisapplianceis

NOT

intendedforusebypersons(includingchildren)withreducedphysical,

sensoryormentalcapabilities,orlackofexperienceandknowledgeunlesstheyhavebeengiven

supervision or instruction concerning use of the appliance by a person responsible for their

safety.

ChildrenshouldbesupervisedtoensurethattheyDONOT

 play with the appliance.

Hydrogen Gas

If the hot water heater is not used for two weeks or more, a quantity of hydrogen gas, which is highly flammable, 

may accumulate in the water heater� To dissipate this safety, it is recommended that a non electrically operated 

hot tap be turned on for several minutes at a sink, or bath, but not a dishwasher or other appliance� During this 

procedure there must be no smoking, open flame or any electrical appliance operating nearby. If hydrogen gas is 

discharged through the tap, it will probably make a sound like air escaping�

Water Temperature

To meet regulatory requirements the temperature of stored water 

MUST NOT 

be less than 60°C� The thermostat 

on your water heater is factory pre-set to 65°C� The thermostat setting can be adjusted between 60°C and 75°C 

by an electrician or other suitably qualified trades person.

WARNING

ThethermostatsettingmustonlybeadjustedbyanElectricianorothersuitablyqualifiedtrades

person. 

TheaccesscovertotheelementandthermostatmustonlyberemovedbyanElectricianorother

suitablyqualifiedtradesperson.

SCALD HAZARDS

Hot Water can cause scalds.
Children, disabled, and the elderly are at the highest risk of 

being scalded.
Feel water temperature before bathing or showering.
Scalds from hot water taps can result in severe injuries to 

young children.
Scalds can occur when children are exposed directly to hot 

water when they are placed into a bath which is too hot.

Always......

Testthetemperatureofthewaterwithyourelbowbeforeplacingyourchildinthebath,alsocarefullyfeel

waterbeforebathingorshoweringyourself.
Supervisechildrenwhenevertheyareinthebathroom.

Make sure that the hot water tap is turned off tightly.

Consider.....

Installingchildprooftapcoversorchildresistanttaps(bothapproacheswillpreventasmallhandbeing

abletoturnonthetap).

Installing tempering valves or thermostatic mixing valves which reduce the hot water temperature delivered 

tothetaps.Yourlocalplumbingauthoritymayalreadyrequirethatthesebefitted.Contactyourinstaller

orlocalplumbingauthorityifindoubt.

Never….

Leave a toddler in the care of another child. They may not understand the need to have the water

temperature set at a safe level.

DANGER BEWARE OF

SCALDING HAZARDS

WARNINGS & SAFETY

Summary of Contents for HOTFLO HFE125S18























Reviews: